Back to Top

1
Hi, Guest!

  LOKASI :  Bekasi

  AKTIVITAS :  25/11/2020

BAGIKAN :   

Bagikan :
  • Valve
  • TRUE UNION BALL CHECK VALVES ( 1/ 2

TRUE UNION BALL CHECK VALVES ( 1/ 2

Update Terakhir
:
10 / 09 / 2020
Min. Pembelian
:
1 Unit
Harga
CALL
Bagikan
:
Perusahaan yang bergerak dibidang Instrumentasi,Engineering,dan Service Solutions.

Perhatian !

Perusahaan ini terdaftar sebagai Free Member. Hindari melakukan pembayaran sebelum bertemu penjual atau melihat barang secara langsung. COD (Cash On Delivery) atau bertemu langsung dengan penjual merupakan metode transaksi aman yang kami sarankan.

Detail TRUE UNION BALL CHECK VALVES ( 1/ 2

TRUE UNION BALL CHECK VALVES ( 1/ 2" -4" ) 1. Design Advantages • Full-length body guide ribs allow maximum flow, minimize turbulence, and prevent ball sticking and chatter. • True Union design facilitates ease of installation and maintenance. • Can be mounted vertically or horizontally. • Less than one ( 1) psi to open. • Requires only 3 - 5 psi ( depending on size) to close down tight. • Seats and seals are easily replaceable. • Optional PVC screen assembly converts standard ball check to foot valve. • Available in socket, threaded, or flanged ( ANSI B16.5 class 150) 2. Materials Of Construction • Less than 1 PSI Pressure to operate. • Operates in vertical or horizontal installations. • One piece seat & seal. • Excellent flow characteristics. TVI Ball Check Valves ( 1/ 2" - 4" ) Design Specifications Thermoplastic Ball Check Valves ( 1/ 2" - 4" ) are of all thermoplastic construction. Body has full length ribs for maximum flow, minimum pressure drop, and to eliminate ball sticking and chatter. Ball is of solid thermoplastic material. Seat is full circle and resilient. A molded gasket seal and seat enlarges seating surface and facilitates maintenance. Valves require less than one ( 1) PSI to open and 3 -5 PSI to close drop tight. Valves are capable of installation in either vertical or horizontal pipe run. Valves are readily adaptable for foot valve service with the addition of a screen assembly. Materials of construction shall be as follows: ( select as required for service) * Body/ Union Nut/ End Connectors PVC, CPVC, ASTM D-1784 PP, ASTM D-4101 PVDF, ASTM D-3222 * Ball PVC, CPVC, ASTM D-1784 PP, ASTM D-4101 PVDF, ASTM D-3222 * Seat/ Seal EPDM, Ethylene - Propylene Diene Monomer Fluorocarbon - Viton® ( DuPont Performance Elastomers) Fluorel ( 3M Corp.) End connectors shall conform to the following standards: * Socket ASTM - D-2467 ( PVC, SCH-80) ASTM, F-437 ( CPVC, SCH-80) * Threaded ASTM - D-2464 ( PVC, SCH-80) ASTM - F-437 ( CPVC, SCH-80) * Flanged ANSI - B16.5 Class 150



















TAGS

 

VALVE GEARBOX , VALVE GEAR STORE , VALVE GEAR CAR , CONTROL VALVE POSITIONER , CONTROL VALVE EXCAVATOR , VALVE LIFTER , VALVE INDEX , VALVE SPECTRA , VALVE STOCK , VALVE JAKARTA , VALVE BEKASI , VALVE JAKARTA , VALVE BANDUNG , VALVE BALI , VALVE MAKASSAR , VALVE INDONESIA , CONTROL VALVE MURAH, CONTROL VALVE STOCK 

Tampilkan Lebih Banyak
pt. unggul daya pratama
pt. unggul daya pratama

PT. UNGGUL DAYA PRATAMA

Jl. Rasamala Raya Blok L10 No 14
Perumahan Telaga Pesona
Telaga Murni - Cikarang Barat
Bekasi, Bekasi
Indonesia 17520
Bekasi
25 / 11 / 2020

Detail TRUE UNION BALL CHECK VALVES ( 1/ 2

TRUE UNION BALL CHECK VALVES ( 1/ 2" -4" ) 1. Design Advantages • Full-length body guide ribs allow maximum flow, minimize turbulence, and prevent ball sticking and chatter. • True Union design facilitates ease of installation and maintenance. • Can be mounted vertically or horizontally. • Less than one ( 1) psi to open. • Requires only 3 - 5 psi ( depending on size) to close down tight. • Seats and seals are easily replaceable. • Optional PVC screen assembly converts standard ball check to foot valve. • Available in socket, threaded, or flanged ( ANSI B16.5 class 150) 2. Materials Of Construction • Less than 1 PSI Pressure to operate. • Operates in vertical or horizontal installations. • One piece seat & seal. • Excellent flow characteristics. TVI Ball Check Valves ( 1/ 2" - 4" ) Design Specifications Thermoplastic Ball Check Valves ( 1/ 2" - 4" ) are of all thermoplastic construction. Body has full length ribs for maximum flow, minimum pressure drop, and to eliminate ball sticking and chatter. Ball is of solid thermoplastic material. Seat is full circle and resilient. A molded gasket seal and seat enlarges seating surface and facilitates maintenance. Valves require less than one ( 1) PSI to open and 3 -5 PSI to close drop tight. Valves are capable of installation in either vertical or horizontal pipe run. Valves are readily adaptable for foot valve service with the addition of a screen assembly. Materials of construction shall be as follows: ( select as required for service) * Body/ Union Nut/ End Connectors PVC, CPVC, ASTM D-1784 PP, ASTM D-4101 PVDF, ASTM D-3222 * Ball PVC, CPVC, ASTM D-1784 PP, ASTM D-4101 PVDF, ASTM D-3222 * Seat/ Seal EPDM, Ethylene - Propylene Diene Monomer Fluorocarbon - Viton® ( DuPont Performance Elastomers) Fluorel ( 3M Corp.) End connectors shall conform to the following standards: * Socket ASTM - D-2467 ( PVC, SCH-80) ASTM, F-437 ( CPVC, SCH-80) * Threaded ASTM - D-2464 ( PVC, SCH-80) ASTM - F-437 ( CPVC, SCH-80) * Flanged ANSI - B16.5 Class 150



















TAGS

 

VALVE GEARBOX , VALVE GEAR STORE , VALVE GEAR CAR , CONTROL VALVE POSITIONER , CONTROL VALVE EXCAVATOR , VALVE LIFTER , VALVE INDEX , VALVE SPECTRA , VALVE STOCK , VALVE JAKARTA , VALVE BEKASI , VALVE JAKARTA , VALVE BANDUNG , VALVE BALI , VALVE MAKASSAR , VALVE INDONESIA , CONTROL VALVE MURAH, CONTROL VALVE STOCK 

Tampilkan Lebih Banyak